Anderson Plug 4 Outlets Flush Mount Plate Recessed Bracket Merit 12V – SB50 – 015 – All Plugs Included
Flush Mounting Plate & Recessed Bracket to Mount 1x 50 Amp Anderson Plug, 2 x Cigarette Plugs and 1 x Merit Plug (Stainless Steel)
– INCLUDES GENUINE ANDERSON PLUG – OTHER PLUGS NOT INCLUDED
Australian Made stainless steel flush mounting power outlet bracket, this mount is an easy solution for mounting 1x 50 Amp Anderson Plug along with 2 x Power (Cigarette) Plug Sockets and a merit plug socket all on the one flush mount bracket. Can be mounted through trims and panels ranging from 1mm to 13mm in thickness. The Anderson bracket has 7 different mounting positions depending on your thickness. Mounting holes are pre-drilled as well as mounting points. Also includes stainless steel bolts & nyloc nuts.
These handy DIY stainless kits allow you to neatly mount a concealed Anderson Plug wherever space will allow. A great little addition to the back of any SUV, Landcruiser, Ute, Canopy, Caravan, Motorhome or Trailer.
– 3x 316 Stainless Plates (#4DE-ACC-015)
– 4x Stainless Bolts
– 4x Stainless Nyloc Nuts
– 4x Stainless Washers
– 2x Stainless Bolts (For Anderson Plug)
– 2x Stainless Nyloc Nuts (For Anderson Plug)
– 1x Power Plug Sockets (Cigarette Plug)
– 1x USB Plug Socket
– 1x Merit Plug
– 1x Genuine Anderson Plug SB50 Grey
– 2x Anderson Connectors
Item is a full set and Kit includes all the plugs. One Genuine Anderson Plug, one merit plug, one cigarette plug and one USB plug.
Visit our store for either
- Kit including Anderson plug only.
- Stainless Plate Kit only.
- Material: Stainless Steel
- Thickness: 1.5mm
- Face plate Dimensions: 100mm x 90mm
Installation is relatively easy.
– Assess where to mount the plate and ensure there is sufficient room behind for mounting.
– Mark the 4x holes with a pen. These four points will be the bolt holes.
– Mark the 4x openings with a pen.
– Being careful cut out the openings
– Drill the four mounting holes.
– Mount the cigarette plugs and merit plugs to the plate
– Assemble and mount your Anderson Plug to the rear bracket with your new stylish plates.
*** Eledric recommends installing 12 volt products with a reputable auto electrician ***
Check out our store to see other combinations available.
Designed and Made in Australia by 4D Engineering
|Dimensions||15 × 15 × 5 cm|