Anderson Plug 4 Outlets Flush Mount Plate Recessed Bracket Merit 12V – SB50 – 015 – All Plugs Not Included
Flush Mounting Plate & Recessed Bracket to Mount 1x 50 Amp Anderson Plug, 2 x Cigarette Plugs and 1 x Merit Plug (Stainless Steel) – PLUGS NOT INCLUDED
Australian Made stainless steel flush mounting power outlet bracket, this mount is an easy solution for mounting 1x 50 Amp Anderson Plug along with 2 x Power (Cigarette) Plug Sockets and a merit plug socket all on the one flush mount bracket. Can be mounted through trims and panels ranging from 1mm to 13mm in thickness. The Anderson bracket has 7 different mounting positions depending on your thickness. Mounting holes are predrilled as well as mounting points. Also includes stainless steel bolts & nyloc nuts.
These handy DIY stainless kits allow you to neatly mount a concealed Anderson Plug wherever space will allow. A great little addition to the back of any SUV, Landcruiser, Ute, Canopy, Caravan, Motorhome or Trailer.
– 3x 316 Stainless Plates (#4DE-ACC-015)
– 4x Stainless Bolts
– 4x Stainless Nyloc Nuts
– 4x Stainless Washers
– 2x Stainless Bolts (For Anderson Plug)
– 2x Stainless Nyloc Nuts (For Anderson Plug)
Item does NOT include the plugs or Anderson plug. This listing is for the stainless steel plate and stainless fasteners for the Anderson Plug only.
Visit our store for either
- Complete kit including all plugs.
- Kit with Anderson Plug only.
- Material: Stainless Steel
- Thickness: 1.5mm
- Face plate Dimensions: 100mm x 90mm
Installation is relatively easy.
– Assess where to mount the plate and ensure there is sufficent room behind for mounting.
– Mark the 4x holes with a pen. These four points will be the bolt holes.
– Mark the 4x openings with a pen.
– Being careful cut out the openings
– Drill the four mounting holes.
– Mount the cigarette plugs and merit plugs to the plate
– Assemble and mount your Anderson Plug to the rear bracket with your new stylish plates.
*** Eledric recommends installing 12 volt products with a reputable auto electrician ***
Check out our store to see other combinations available.
Designed and Made in Australia by 4D Engineering
|Dimensions||15 × 15 × 2 cm|