Anderson Plug Dual Battery Wiring Kit 12V DC for 4×4 4WD Ute Camper Plug & Play – SB50 – Grey – 12V
DIY Plug & Play Dual Battery Wiring 12V Kit with Genuine Anderson Plugs for your 4×4, Ute or Camper. Made in Australia by Eledric.
DIY Plug & Play 6.5Mt Dual Battery Wiring Kit. Easy installation with everything needed for installing your DC charger, VSR or battery isolator to your 4×4. Using Australian made 8 B&S cable and genuine Anderson Connector Plugs.
Connect the fused section to your battery, run the 6mt section from the front to the rear of your 4WD using the supplied cable ties to secure to the chassis. When connected and secure install the supplied maxi fuse and now it is ready to use.
Kit includes bonus 8mm Lugs.
1x 6.0Mt 8B&S (7.71mm2) Twin Sheath (Pre-Crimped Anderson Terminals)
1x 0.5Mt Maxi Fuse Holder fitted with Genuine Anderson Plug & 8mm Battery Terminals
1x 60Amp Maxi Fuse (Blue)
1x Genuine Anderson Plug & Terminals
1x Genuine Anderson Plug Cover
1x 20Pk of 200mm UV Cable Ties
4x 8mm Lugs
Kit will consist of 4x Genuine Anderson Plugs in Total
Type: Battery Cable
Gauge: 8 B&S
Cross Section: 7.71mm2
Core: Oxygen Free Copper
Weight: 0.095kg per meter
Environment: UV Stabilised
Temp Rating: V90 (90°C)
Voltage Rating: Up to 110V
Compliance: AS/NZ 3808:2000 & RoHS
Australian Made 8 B&S (7.71mm2) Cable, rated at 74 Amp @ 30°C.
Made in Australia with quality cable by Eledric
|Dimensions||13 × 13 × 5 cm|
Only logged in customers who have purchased this product may leave a review.