G4 LED 5 SMD 5050 Light – COOL WHITE
- 1 x LED 5 SMD 5050 G4 light cool white
G4 LED Light commonly used on caravan’s, pop-top’s, camper trailer’s, RV’s, motorhomes (particularly Jayco’s) & boats replacing the original G4 bulbs. Simply plug and play. NO REWIRING REQUIRED. Keep in mind that these lights are polarity conscious so it does matter which way the light is plugged in. If the light does not work the first time remove it and plug in the opposite way. Ideal for the overhead lights in cupboards, reading lights and the lights in the range hood.
The light output of this light is good and will not disappoint anyone wanting lighting inside or outside there caravan. This light is a direct replacement of the existing G4 bulb. No rewiring required. Simply remove your existing bulb and replace with this LED light. It plugs straight in, taking a matter of seconds to do. Pull out your old bulb and plug this new LED light straight into the socket.
This LED G4 Light has been manufactured by an ISO9001:2008 certified company to very high standards using only high quality Epistar LED chips, and with EMC certification. Consider the quality of LEDs and ensure the lights are EMC compliant before you purchase.
LIGHT COLOUR: White (6000K to 7000K)
LED BRAND: Epistar (High Quality)
LED TYPE: SMD 5050
LED QTY: 5
BASE TYPE: G4
VOLTAGE: 12V DC
CURRENT DRAW: 0.030Amp
BEAM ANGEL: 120deg
LUMINOUS OUTPUT: 90-110Lm (Approx)
HEIGHT: 12mm (Excluding Pins)
HEIGHT: 29mm (Including Pins)
HEAD WIDTH: 11mm
PIN LENGTH: 17mm
DISTANCE BETWEEN PINS: 4mm
- They are LED, drawing much less power than a conventional bulb.
- Brand name Epistar LED chips.
- Direct plug and play. No rewiring required.
- Electro-Magnetic Compatibility. (EMC Compliant).
- High luminous output compared to wattage.
- Manufactured by an ISO9001:2008 certified company.
(EMC) Electromagnetic Compatibility is the ability of electronic devices such as this LED light to operate as intended in proximity to other electronic devices or in the presence of electromagnetic fields. Unintentional radio frequency emissions from an electronic device and immunity of the device to radio frequency interference from other electromagnetic sources are included within electromagnetic compatibility.
An example of this being, you are watching your LCD TV and a non-EMC complaint light is switched on. You then start seeing interference on your TV screen, static, even picture freeze. Switching the light off and the interference has gone. By using an EMC compliant lighting product avoids this from happening, especially when these days so many devices we use contain sensitive electronics.
Please be aware that some non-EMC compliant LEDs may cause interference with electronic equipment such as TV’s, radio’s, etc.
When comparing the power consumption of this LED G4 light to an existing G4 bulb the results are like this:
– At 12.5V DC the LED G4 light uses 0.375W of power and draws 0.030Amps.
– At 12.5V DC the old G4 light uses 10W of power and draws 0.8Amps.
– With this comparison the LED light uses one twentieth less power, BUT, produces good light.
Tags: Bed, Bulb, Caravan, Cool, Dome, Door, Exterior, G4, Hood, Interior, Jayco, LED, Light, Motorhome, Panel, Range, Replacement, RV, White
|Dimensions||4 × 2 × 1.5 cm|
Only logged in customers who have purchased this product may leave a review.